Wireless Sync HOWTO
Using jpilot to sync your PalmOS device to your desktop across a wireless (802.11b) network.
Eric Womack
Las Vegas Data LLC.
eric@lasvegasdata.com
| Revision History | ||
|---|---|---|
| Revision 0.12 | 2001-12-12 | |
| FGPL added, list of notes to booklet change begun | ||
| Revision 0.11 | 2001-12-12 | |
| Links corrected, version tracking added, address completed | ||
| Revision 0.1 | 2001-12-07 | |
| Initial realease for comments | ||
This document explains how to perform a wireless, network sync between a Handspring Visor and jpilot or jpilot-sync . Although this concentrates on specific hardware, the techniques and information should translate to all similar devices.
- Table of Contents
- 1. Introduction
- 2. Components Used & Required Software
- 3. Setup
-
- 3.1. Visor
- 3.2. SpringPort Module
- 3.3. Software Configuration
- 4. Operation
- 5. License
This procedure has been tested on the Handspring Visor Deluxe . It should work on all PalmOS based devices as well.
| Next | ||
| Introduction |
