Copyright © 2000 by Commandprompt, Inc
This is a LinuxPorts.Com Document for the Linux Documentation Project. It has been sponsored in part by the Open Source Documentation Fund.
The current version is v1.7.0 is a minor update with some grammar fixes.
-
Table of Contents
-
1. How can I help?
-
-
1.1. Assisting with the Net-HOWTO
-
2. Document History
-
-
2.1. Feedback
-
3. How to use this HOWTO.
-
-
3.1. Conventions used in this document
-
4. General Information about Linux Networking.
-
-
4.1. Linux Networking Resources.
-
4.2. Sources of non-linux-specific network information.
-
5. Generic Network Configuration Information.
-
-
5.1. What do I need to start ?
-
-
5.1.1. Current Kernel source(Optional).
-
5.1.2. IP Addresses: an Explanation.
-
5.2. Where should I put the configuration commands ?
-
5.3. Creating your network interfaces.
-
5.4. Configuring a network interface. Kernels 2.0 and 2.2
-
5.5. Configuring your Name Resolver.
-
-
5.5.1. What's in a name ?
-
5.5.2. What information you will need.
-
5.5.3. /etc/resolv.conf
-
5.5.4. /etc/host.conf
-
5.5.5. /etc/hosts
-
5.5.6. Running a name server
-
5.6. Configuring your loopback interface.
-
5.7. Routing.
-
-
5.7.1. So what does the
routed
program do ?
-
5.8. Configuring your network servers and services.
-
-
5.8.1.
/etc/services
-
-
5.8.1.1. An example
/etc/services
file.
-
5.8.2.
/etc/inetd.conf
-
-
5.8.2.1. An example
/etc/inetd.conf
-
5.9. Other miscellaneous network related configuration files.
-
-
5.9.1.
/etc/protocols
-
5.9.2.
/etc/networks
-
5.10. Network Security and access control.
-
-
5.10.1. /etc/ftpusers
-
5.10.2. /etc/securetty
-
5.10.3. The
tcpd
hosts access control mechanism.
-
-
5.10.3.1. /etc/hosts.allow
-
5.10.3.2. /etc/hosts.deny
-
5.10.4. /etc/hosts.equiv
-
5.10.5. Configure your
ftp
daemon properly.
-
5.10.6. Network Firewalling.
-
5.10.7. Other suggestions.
-
6. Ethernet Information
-
-
6.1. Supported Ethernet Cards
-
-
6.1.1. 3Com
-
6.1.2. AMD, ATT, Allied Telesis, Ansel, Apricot
-
6.1.3. Cabletron, Cogent, Crystal Lan
-
6.1.4. Danpex, DEC, Digi, DLink
-
6.1.5. Fujitsu, HP, ICL, Intel
-
6.1.6. KTI, Macromate, NCR NE2000/1000, Netgear, New Media
-
6.1.7. PureData, SEEQ, SMC
-
6.1.8. Sun Lance, Sun Intel, Schneider, WD, Zenith, IBM, Enyx
-
6.2. General Ethernet Information
-
6.3. Using 2 or more Ethernet Cards in the same machine
-
-
6.3.1. If your driver is a module (Normal with newer distros)
-
7. IP Related Information
-
-
7.1. Kernel Level Options
-
-
7.1.1. General IP option listing
-
7.2. EQL - multiple line traffic equaliser
-
7.3. IP Accounting (for Linux-2.0)
-
-
7.3.1. IP Accounting (for Linux-2.2)
-
7.4. IP Aliasing
-
7.5. IP Firewall (for Linux-2.0)
-
-
7.5.1. IP Firewall (for Linux-2.2)
-
7.6. IPIP Encapsulation
-
-
7.6.1. A tunneled network configuration.
-
7.6.2. A tunneled host configuration.
-
7.7. IP Masquerade
-
-
7.7.1. Masquerading with IPFWADM (Kernels 2.0.x)
-
7.7.2. Masquerading with IPCHAINS
-
7.8. IP Transparent Proxy
-
7.9. IPv6
-
7.10. IPv6 Linux resources
-
7.11. Mobile IP
-
7.12. Multicast
-
7.13. Traffic Shaper - Changing allowed bandwidth
-
8. DHCP and DHCPD
-
-
8.1. DHCP Client Setup for users of LinuxConf
-
8.2. DHCP Server Setup for Linux
-
-
8.2.1. Options for DHCPD
-
8.2.2. Starting the server
-
9. Advanced Networking with Kernel 2.2
-
-
9.1. The Basics
-
-
9.1.1. Using the information
-
9.2. Adding a route with the new ip tools
-
9.3. Using NAT with Kernel 2.2
-
10. Kernel 2.2 IP Command Reference (Work In Progress)
-
-
10.1. ip
-
11. Using common PC hardware
-
-
11.1. ISDN
-
11.2. PLIP for Linux-2.0
-
-
11.2.1. PLIP for Linux-2.2
-
11.3. PPP
-
11.4. SLIP client - (Antiquated)
-
-
11.4.1. dip
-
11.4.2. slattach
-
11.4.3. When do I use which ?
-
11.4.4. Static SLIP server with a dialup line and DIP.
-
11.4.5. Dynamic SLIP server with a dialup line and DIP.
-
11.4.6. Using DIP.
-
11.4.7. Permanent SLIP connection using a leased line and slattach.
-
11.4.8. SLIP server.
-
11.4.9. Slip Server using
sliplogin
.
-
11.4.10. Where to get
sliplogin
-
11.4.11. Configuring
/etc/passwd
for Slip hosts.
-
11.4.12. Configuring
/etc/slip.hosts
-
11.4.13. Configuring the
/etc/slip.login
file.
-
11.4.14. Configuring the
/etc/slip.logout
file.
-
11.4.15. Configuring the
/etc/slip.tty
file.
-
11.4.16. Slip Server using
dip
.
-
11.4.17. Configuring
/etc/diphosts
-
11.4.18. SLIP server using the
dSLIP
package.
-
12. Other Network Technologies
-
-
12.1. ARCNet
-
12.2. Appletalk (
AF_APPLETALK
)
-
-
12.2.1. Configuring the Appletalk software.
-
12.2.2. Exporting a Linux filesystems via Appletalk.
-
12.2.3. Sharing your Linux printer across Appletalk.
-
12.2.4. Starting the appletalk software.
-
12.2.5. Testing the appletalk software.
-
12.2.6. Caveats of the appletalk software.
-
12.2.7. More information
-
12.3. ATM
-
12.4. AX25 (
AF_AX25
)
-
12.5. DECNet
-
12.6. FDDI
-
12.7. Frame Relay
-
12.8. IPX (
AF_IPX
)
-
12.9. NetRom (
AF_NETROM
)
-
12.10. Rose protocol (
AF_ROSE
)
-
12.11. SAMBA - `NetBEUI', `NetBios', `CIFS' support.
-
12.12. STRIP support (Starmode Radio IP)
-
12.13. Token Ring
-
12.14. X.25
-
12.15. WaveLan Card
-
13. Cables and Cabling
-
-
13.1. Serial NULL Modem cable
-
13.2. Parallel port cable (PLIP cable)
-
13.3. 10base2 (thin coax) Ethernet Cabling
-
13.4. Twisted Pair Ethernet Cable
-
14. Glossary of Terms used in this document.
-
15. Authors
-
-
15.1. Current
-
15.2. Past
-
16. Copyright.