Next Previous Contents

---

Framebuffer HOWTO

Alex Buell, alex.buell@tahallah.clara.co.uk

v1.2, 27 Feb 2000

---

This document describes how to use the framebuffer devices in Linux with a variety of platforms. This also includes how to set up multi-headed displays.

---

1. History

2. Contributors

3. What is a framebuffer device?

4. What advantages does framebuffer devices have?

5. Using framebuffer devices on Intel platforms

• 5.1 What is vesafb?
• 5.2 How do I activate the vesafb drivers?
• 5.3 What VESA modes are available to me?
• 5.4 Got a Matrox card?
• 5.5 Got a Permedia card?
• 5.6 Got a ATI card?
• 5.7 Which graphic cards are VESA 2.0 compliant?
• 5.8 Can I make vesafb as a module?
• 5.9 How do I modify the cursor?

6. Using framebuffer devices on Atari m68k platforms

• 6.1 What modes are available on Atari m68k platforms?
• 6.2 Additional suboptions on Atari m68k platforms
• 6.3 Using the internal suboption on Atari m68k platforms
• 6.4 Using the external suboption on Atari m68k platforms

7. Using framebuffer devices on Amiga m68k platforms

• 7.1 What modes are available for Amiga m68k platforms?
• 7.2 Additional suboptions on Amiga m68k platforms
• 7.3 Supported Amiga graphic expansion boards

8. Using framebuffer devices on Macintosh m68k platforms

9. Using framebuffer devices on PowerPC platforms

10. Using framebuffer devices on Alpha platforms

• 10.1 What modes are available to me?
• 10.2 Which graphic cards can work with the frambuffer device?

11. Using framebuffer devices on SPARC platforms

• 11.1 Which graphic cards can work with the framebuffer device?
• 11.2 Configuring the framebuffer devices

12. Using framebuffer devices on MIPS platforms

13. Using framebuffer devices on ARM platforms

• 13.1 Netwinders
• 13.2 Acorn Archimedes
• 13.3 Other ARM ports (SA 7110s et. al)

14. Using multi-headed framebuffers

• 14.1 Introduction
• 14.2 Feedback
• 14.3 Contributors
• 14.4 Standard Disclaimer
• 14.5 Copyright Information
• 14.6 What hardware is supported?
• 14.7 Commercial support
• 14.8 Getting all the stuff.
• 14.9 Getting Started
• 14.10 Summary
• 14.11 Other Notes and Problems

15. Using/Changing fonts

16. Changing console modes

17. Setting up the X11 FBdev driver

18. How do I convert XFree86 mode-lines into framebuffer device timings?

19. Changing the Linux logo

20. Looking for further information?

---

Next Previous Contents